Knowledge Base
Case Studies
Real machining projects — from drawing to finished part. See how we solve complex manufacturing challenges across industries.
Featured Projects
Real Machining Cases
Each project demonstrates our capability to deliver precision parts across materials and complexity levels.
5-Axis Impeller
- — Complex blade geometry
- — Stainless steel 316L
- — Ra 0.8 surface finish
- — ±0.025mm tolerance achieved
Process
5-Axis Simultaneous
Material
SS 316L
Stainless Medical Housing
- — Fine finish, cleaned and deburred
- — Complex internal channels
- — Biocompatible material
- — Full traceability required
Process
±0.01mm
Material
SS 316L / Titanium
Robotics Joint Part
- — High concentricity bores
- — Multi-face machining
- — Lightweight aluminum design
- — Anodized surface treatment
Process
±0.01mm
Material
Al 7075-T6
Aluminum Heat Sink
- — High aspect ratio fins
- — Flatness within 0.05mm
- — Thermal conductivity optimized
- — Anodized finish Type II
Process
±0.05mm
Material
Al 6063-T5
Quality Standards
Quality Assurance
Every case study part undergoes rigorous inspection and documentation before delivery.
Dimensional Verification
CMM inspection report with full GD&T analysis available on request from our group's shared metrology center for case study parts.
Surface Finish Validation
Profilometer-measured Ra values, verified against customer specifications.
Material Certification
EN 10204 3.1 certificates available on request; full chemical composition traceability maintained.
Final QC Documentation
Complete inspection reports, photos, and packaging records for each shipment.
Have a Similar Project?
Upload your drawings — engineer feedback within 2h.