Industries
Communications & Satellite Equipment Manufacturing
Demanding operating conditions · Traceable materials · Rigorous quality standards. Precision CNC parts for commercial satellite and communications programs.
Capabilities
Component Categories
From satellite structures to communication equipment — we machine critical parts for high-reliability systems.
Satellite Brackets
- — Satellite bus brackets
- — Solar panel mounts
- — Antenna booms
- — Structure fittings
Precision Tolerance
±0.005mm
Requires precision finishing & inspection. Subject to drawing review.
Common Materials
Inconel 718, Titanium Ti-6Al-4V, Stainless 17-4 PH
Servo Housings
- — Actuator housings
- — Gimbal brackets
- — Torque link components
- — Bushing adapters
Precision Tolerance
±0.01mm
Requires precision finishing & inspection. Subject to drawing review.
Common Materials
Steel 4340, 300M, Titanium Ti-6Al-4V
Antenna Housings
- — RF enclosures
- — GPS antenna mounts
- — Communication rack brackets
- — Sensor integration plates
Precision Tolerance
±0.025mm
Requires precision finishing & inspection. Subject to drawing review.
Common Materials
Aluminum 6061/7075, Magnesium AZ31
Structural Frames
- — Frame connectors
- — Panel fittings
- — Waveguide manifolds
- — Quick-disconnect couplings
Precision Tolerance
±0.01mm
Requires precision finishing & inspection. Subject to drawing review.
Common Materials
Stainless 316, Titanium, Aluminum 2024
Quality Control
Quality Standards
High-reliability parts demand the highest levels of traceability and inspection.
Material Certification
EN 10204 3.1 and ASTM material certs available on request. Special alloys (Inconel, Ti) fully documented.
Batch Traceability
Heat lot tracking from raw material through final inspection. Every part traceable to its source.
NDT Reports
Non-destructive testing available — dye penetrant, ultrasonic, and X-ray inspection per customer requirements.
Critical-Part Inspection
100% inspection available for critical system parts on request. Full dimensional reports provided per agreement.
Product Showcase
Components Showcase
High-reliability parts — satellite structure, servo housings, structural frames. Product renderings for process demonstration only. Visual representation of machining capabilities. Images are for reference only due to NDA.
CNC machined aluminum satellite bracket
Precision servo actuator housing
Precision machined blade component
Antenna housing CNC machined
In-depth guides
Machining guides from our technical blog
Notes on RF housings, waveguides and lightweight structural parts.
Shake the Sand Out of Your Shoe: Why We Retired Two Machines
Sold for RMB 20,000 each. The replacements cost more than ten times that. On paper the math says no. Here is what actually forced the decision.
Oct 23, 2026 →
Same Part, Same Drawing — So Why Can Two Quotes Differ So Much?
An 8,000-piece order. Inspecting box by box caught 140 parts that would not pass the Go gauge. A cheap quote never removes inspection cost — it moves it.
Oct 19, 2026 →
POM Costs Less Than Metal. So Why Is the Machined Part Pricier?
Acetal stock costs less than aluminum, yet the finished part often costs more. Material is one line in the quote; grip, heat and measurement are all the rest.
Oct 15, 2026 →
Inspection and Acceptance: What to Check When Parts Arrive
The report came back green, then assembly failed. Good inspection isn't fault-finding — it answers "will it work" with data before you build.
Sep 17, 2026 →
Why Your Parts Won't Assemble: Fit, Accumulation, and Datum Transfer
The drawing is right, machining is in tolerance, yet assembly jams — three effects stacking at once: fit, tolerance accumulation, and datum transfer.
Sep 16, 2026 →
Tighter Isn't Better: Which Dimensions Are Worth Paying For
Treating tolerance as a precision score is the most expensive mistake on a drawing. The standard says class m, and weigh what the shop can hold.
Sep 15, 2026 →
From Idea to Quotable Drawing: The Minimum You Actually Need
You have an idea, a photo, or an AI-generated model. How does it become something a shop can quote? Not what to write on a drawing — how one exists at all.
Sep 14, 2026 →
Before or After Finishing: The One Line Most Drawings Forget
Leave the basis blank and the shop, the finisher and inspection each assume something different. Three ways to write "before or after coating" so they can't.
Sep 13, 2026 →
AI Can Draw It. Can It Be Machined? DFM in the Age of AI
Generative design can cut 40% of a part's weight in seconds — but DFM still needs a human. What AI leaves out, and three checks before you send a drawing.
Sep 13, 2026 →
Why Lead Time Is Worth Paying For: A Million Quotes, Very Few Suppliers Who Can Actually Keep Up
Send one drawing to three shops and the quotes come back three times apart. What customers really buy isn't machine time — it's not having to worry.
Sep 12, 2026 →
From Drawing to Cost: How a CNC Part Actually Gets Made
A beginner's walk through the chain — drawing, DFM, material, machine, programming, finishing — and where the money in a CNC quote actually goes.
Sep 10, 2026 →
Machining and Surface Finishing: Where Most of the Calendar Actually Goes
The two stations that eat the most time and money: what happens on the machine, why finishing is outsourced, and the traps that catch first-time buyers.
Sep 10, 2026 →
Which CNC Machine Does Your Part Actually Need? (And a Short History of How We Got Here)
3-axis, 4-axis, 5-axis, turning, mill-turn, wire EDM or grinding — which should make your part? Match geometry to process, from punched tape to AI.
Sep 10, 2026 →
How to Choose a CNC Machining Supplier in China: A Practical Guide to Quality, Price and Lead Time
More than price: the 7 checks that separate a real machine shop from a middleman, and 4 questions that expose a weak delivery promise.
Sep 9, 2026 →
6061 vs 7075 Aluminum: How to Choose the Right Alloy for CNC Machining
6061 or 7075? Compare strength, machinability, corrosion resistance, cost and typical applications to pick the right aluminum for your part.
Sep 8, 2026 →
Need satellite & communications parts?
Upload your drawing and our engineers will confirm material and process feasibility within 2 hours.