Vertical Machining Center
Taikan T-V1270S
Large-format BT40 VMC built for heavy die-steel milling and large mold work, with a 1270 x 700 x 700 mm working envelope and rigid cast iron construction.
立式加工中心
台群 T-V1270S
大行程 BT40 重型立加，1270 x 700 x 700 mm 加工范围，高刚性铸铁床身，专为大型模具与重型模钢铣削设计。
Representative unit of Taikan T-V1270S · Multiple units in our family network
Overview
The Taikan T-V1270S is our largest three-axis vertical machining center, purpose-built for heavy cutting on large workpieces. Its 1,270 mm X-axis travel and 6,250 kg machine mass deliver the stability needed for deep cuts in die steel and large aluminum plates.
Multiple units operate across our associated shop network, giving us scalable capacity for both mold projects and large-part production runs. For full coordinate measurement, critical parts can be sent to our group's shared metrology center"s Hexagon CMM on request (not in-house standard equipment).
设备概述
台群 T-V1270S 是我们最大规格的三轴立式加工中心，专为大型工件的重切削设计。1270 mm X 轴行程与 6250 kg 整机重量，为模钢深切削和大型铝板加工提供充足的稳定性。
集团协作产能网络内多台机组协同运行，无论是模具项目还是大件量产均可灵活扩产。关键尺寸厂内检测；完整三坐标测量可送至集团共享计量中心的海克斯康三坐标按需完成（非本公司标配设备）。
Technical Specifications
技术参数
Why This Machine
Large Working Envelope
1,270 mm X-travel handles big mold bases and long aluminum extrusions in a single setup.
Rigid Cast Iron Construction
6,250 kg machine weight with rib-reinforced base provides vibration damping for heavy cuts.
BT40 Heavy-Cut Spindle
Broad speed range from 8,000 to 12,000 rpm covers both steel heavy-cutting and aluminum finishing.
24-Pocket Arm-Type Tool Changer
Complex mill-drill-tap cycles in one setup, reliable tool change for production runs.
Family-Network Production Capacity
Multiple T-V1270S units across our cell — your large-part order never depends on a single machine.
CMM-verified via our group"s shared metrology center Quality
All critical dimensions cross-checked; full coordinate measurement can be arranged at our group's shared metrology center"s Hexagon CMM on request (not in-house standard equipment).
设备亮点
大加工范围
1270 mm X 轴行程，一次装夹即可完成大型模胚和长铝型材加工。
高刚性铸铁结构
6250 kg 整机重量，筋板加强床身，重切削下减振效果优异。
BT40 重切削主轴
8000 到 12000 rpm 宽转速范围，兼顾钢件重切削与铝件精加工。
24 把臂式刀库
铣-钻-攻复合工序一次装夹完成，换刀稳定，适合批量生产。
集团协作产能网络产能
车间内多台 T-V1270S 并行，大型工件订单不依赖单机交期。
三次元检测把关
所有关键尺寸均经海克斯康三次元复核，出货品质有保障。
Verified Equipment / 铭牌验证
This page features a representative Taikan T-V1270S unit from our family workshop. The machine nameplate confirms the model and build record, ensuring full traceability for your project.
Representative nameplate of Taikan T-V1270S · 台群 T-V1270S 代表铭牌